Introducing: The Elevated Cable Riser
When form and function meets through the eyes and ears of Klutz Design, we redefine the concept and performance of cable risers as you know it. With a Scandinavian modern design, we combine six layers of unique materials, ideas and functionality to deliver unrivaled anticipation and pure musical joy. Ready for you to try with a 30 day return policy. The Elevated cable risers are the work of many years and ears - we are sure you'll keep them.
The Maple Cradle
Cut in massive maple, the cradle of the Elevated cable riser is not only the fist layer of vibration control, but also part of a simple cable management system. In its standard shape (the "E"), it allows for two cables to be run through thus also helping to sort out the usual mess behind the rack or shelves. The standard Elevated cable riser accommodates for cables up to 1 inch in diameter (2,5cms). Made from maple, a classic and proven material used in many audio products, the Cradle is then glued to the Quartz Cushion.
The Quartz Cushion
To further neutralize both air-born vibrations as well as those few coming through the Corian bed, the Cradle is placed on a cushion made of soft, supple calf-leather. It is filled with quartz crystal sand - known for its piezoelectric capabilities - converting physical energy (from vibration) to heat. The Cushion elevates the Cradle approximately 3-4 mms above the Corian Bed to ensure minimum transfer of vibrations in either direction. Any vibrations will be dissipated through the quartz cushion.
The Corian Bed
Holding the Cradle and Cushion is a bed milled from one piece of Corian - one of the most inert materials available. Chosen for a combination of its weight (adding a low point of gravity), but also its material difference in minimising vibrations from the floor. As a final, or first, layer of isolation, two Small Fat Dots from Herbie's Audio Lab are applied to the bottom of the Elevated cable riser to futher eliminate micro-vibrations.